VX-2R O
PERATING
M
ANUAL
20
A
DVANCED
O
PERATION
Checking the Repeater Uplink (Input) Frequency
It often is helpful to be able to check the uplink (input) frequency of a repeater, to see if the
calling station is within direct (“Simplex”) range.
To do this, just press the [
HM/RV
] key. You’ll notice that the display has shifted to the
repeater uplink frequency. Press the [
HM/RV
] key again to cause operation to revert to
normal monitoring of the repeater downlink (output) frequency.
The configuration of this key may be set either to “RV” (for checking the
input frequency of a repeater), or “HM” (for instant switching to the “Home”
channel for the band you are operating on). To change the configuration of
this key, use Set Mode Item 22: HM/RV. See page 67.
R
EPEATER
O
PERATION
