VX-2R O
PERATING
M
ANUAL
29
A
DVANCED
O
PERATION
DTMF O
PERATION
Despite the lack of a DTMF keypad, you can still transmit DTMF tones with the
VX-2R
for repeater control or autopatch use.
Manual DTMF Tone Generation
1.
Press and hold the [
H/L
] key for one second to enter the Set mode.
2.
Rotate the
DIAL
knob to select Set Mode Item 17:
DTMF
.
3.
Press the [
H/L
] key to enable adjustment of this Set Mode Item.
4.
Rotate the
DIAL
knob to select “
MANUAL
.”
5.
Press the
PTT
switch to return to normal display.
6.
Hold the
PTT
switch in to continue transmitting during the following steps.
A. Press the [
H/L
] key momentarily.
B. Rotate the
DIAL
knob to select the number to be sent, then press the [
H/L
] key
momentarily to send the number.
C. Repeat step B as many times as needed until you have completed the number
string.
D. Release the
PTT
switch.
The DTMF “
Û
” code is displayed as “E,” and the DTMF code “#” is dis-
played as “F” on the display.
DTMF Autodialer
Nine DTMF Autodial memories are provided, allowing you to store telephone numbers for
autopatch use. You can also store short autopatch or Internet-link access code streams so as
to avoid having to send them manually.
Here is the DTMF Autodial storage procedure:
1.
Press and hold in the [
H/L
] key for one second to enter the Set mode.
2.
Rotate the
DIAL
knob to select Set Mode Item 18:
DTMF S
.
3.
Press the [
H/L
] key to enable adjustment of this Set Mode Item.
4.
Rotate the
DIAL
knob to select the DTMF Memory register
into which you wish to store this DTMF string.
5.
Press the [
V/M
] key to begin DTMF Memory entry into the
selected register. The first digit location will blink.
6.
Rotate the
DIAL
knob to select the first digit of the DTMF string.
Selectable entries are 1 - 9, and A - F, with E and F representing
DTMF “
Û
” and “#” tones respectively.
7.
Press the [
V/M
] key momentarily to accept the first digit and
move on to the second digit of the DTMF string.
8.
Repeat the previous steps until you have completed the tele-
