Yaesu VX-170, Руководство пользователя

Страница: 78 / 88

VX-170 O
PERATING
M
ANUAL
76
Function : Selects the
MONI
key (just below the
PTT
switch) function.
Available Values : MONI/T-CALL
Default : Depends on the transceiver version.
MONI: Pressing the MONI key causes the Noise/Tone Squelch to be over-ridden, allow-
ing you to listen for weak (or non-encoded) signals.
T-CALL: Pressing the MONI key activates a 1750-Hz burst tone, used for repeater access
in many countries (especially in Europe).
Set Mode Item 28
[
NAME
]
Function : Toggles the display indication between “frequency” and the channel’s “Alpha/
Numeric Tag.”
Available Values : FREQ/ALPHA
Default : FREQ
Set Mode Item 29
[
NM WRT
]
Function : Stores Alpha-Numeric “Tags” for the Memory channels.
See page 31 for details.
Set Mode Item 30
[
PSWD
]
Function : Enables/disables the Password feature.
Available Values : PWD.OFF/PWD. ON
Default : PWD.OFF
Set Mode Item 31
[
PSWD W
]
Function : Stores the password.
Available entries are 0-9, A, B, C, D, E (substitute for “
¼
”), and F (substitute for “#”)
Set Mode Item 32
[
RESUME
]
Function : Selects the Scan Resume mode.
Available Values : BUSY/HOLD/TIME
Default : BUSY
BUSY: The scanner will hold until the signal disappears, then will resume when the car-
rier drops.
HOLD: The scanner will stop when a signal is received, and will not restart.
TIME: The scanner will hold for the five seconds, then resume whether or not the other
station is still transmitting.
Set Mode Item 33
[
REV/HM
]
S
ET
(
M
ENU
)
M
ODE