40
Menu Selection Details
52 VFO MODE
Function:
Set the frequency setting range in the VFO mode by DIAL knob.
Available Values:
ALL / BAND
Default:
BAND
ALL: Tuning continues to the next band when reaching the end of a band.
BAND: Tuning continues to the other end of the current band when reaching the end of
the band. When changing the band, press the [
BAND
(
SQL
)] key.
53* WX ALERT (USA version only)
Function:
Set the weather Alert Feature, used for notifying storms and hurricanes, ON
or OFF.
Available Values:
ON / OFF
Default:
OFF
54* WX VOL (USA version only)
Function:
Selects the audio output level of the Weather Alert.
Available Values:
NOR VOL / MAX VOL
Default:
NOR VOL
55* (53) W/N DEV
Function:
Reduction of the Microphone Gain/Deviation and receiver bandwidth.
Available Values:
WIDE / NARROW
Default:
WIDE
56* (54) W-DGID
Function:
Sets the WIRES-X DG-ID number.
Available Values:
AUTO/DGID01-99
Default:
AUTO
AUTO:
Only open nodes, set to the DG-ID number “00” may be connected.
DGID01 - 99: Only nodes matching the set DG-ID number may be connected.
57* (55) MY CALL
Function:
Sets your station call sign.
Here’s how to input the call sign:
1. Press the [
MHz
(
SETUP
)] key momentarily.
The currently registered call sign ID is shown.
2. Rotate the
DIAL
knob to select the first letter/number of the call sign, then press the
[
V/M
(
MW
)] key momentarily to save the first letter/number and move on to the next
character.
3. Repeat the previous step as necessary to complete the call sign (up to 10 characters).
4. To make a correction, press the [
BAND
(
SQL
)] key to backspace the cursor; now re-en-
ter the correct letter/number.
5. When the desired call sign is entered, press and hold the [
MHz
(
SETUP
)] key to save
the settings and exit to normal operation.
