27
GM Function
GM Alert Beep
To alert you to the current status of GM operation, the GM (Group Monitor) feature allows
two kinds of alert beeps (with the additional option of turning them off). Depending on your
location and the potential annoyance associated with frequent beeps, you may choose
the Beep mode which best suits your needs.
1. Press and hold the [
MHz
(
SETUP
)] key, then rotate
the
DIAL
knob to select “
GM RINGR 21
”.
2. Press the [
MHz
(
SETUP
)] key, and then rotate the
DIAL
knob to select one of the following parame-
ters.
IN RANGE: Beeps sound only when the radio first
detects that a station is within range.
ALWAYS: Beeps sound every time a polling
transmission is received from another
station.
OFF:
No alert beeps sound.
Default:
IN RANGE
3. Press and hold the [
MHz
(
SETUP
)] key to save the
new setting and exit to normal operation.
GM Polling Interval
The GM (Group Monitor) feature may be programmed to poll normal time (default value)
or long time. To change the polling interval:
1. Press and hold the [
MHz
(
SETUP
)] key, then rotate
the
DIAL
knob to select “
GM INTVL 22
”.
2. Press the [
MHz
(
SETUP
)] key, then rotate the
DIAL
knob to select the desired polling interval
(NORMAL or LONG).
Default:
NORMAL
3. Press and hold the [
MHz
(
SETUP
)] key to save the
new setting and exit to normal operation.
