Yaesu FTM-500DR, Руководство для продвинутых пользователей

Страница: 63 / 74

63
ALL
Outputs all the received beacons.
MOBILE Outputs only mobile station beacons.
FREQUENCY Outputs only the beacons of stations with frequency infor-
mation.
OBJECT/ITEM Outputs only the beacons of object stations or item stations.
DIGIPEATER Outputs only the beacons of digital repeater stations.
VoIP Outputs only beacons of VoIP stations such as WIRES.
WEATHER Outputs only beacons of the weather stations.
YAESU Outputs only beacons of stations using Yaesu transceivers.
CALL RINGER Outputs only the information of call sign ringer stations which
are set from [80 APRS RINGER (CS)] in the APRS Setup menu.
RANGE RINGER Outputs only the information of stations recognized as an
approaching station by the [79 APRS RINGER] range ringer
function in the APRS Setup menu.
70 DATA BAND
Set the operating band of the APRS (internal modem) and data communication (when
using the DATA jack at the back of the main body).
1. Press and hold the
FUNC knob key

[ 70 DATA BAND ]

Press the FUNC knob
APRS
Sets the APRS operating band.
1. Rotate the
FUNC
knob to select [
APRS
] then press the
FUNC
knob.
2. Rotate the FUNC to select the APRS operating band, then press the FUNC knob.
MAIN BAND Always operate on the Main Band (upper region of the screen).
SUB BAND Always operate on the Sub Band (lower area of the screen).
THIS BAND Setting this Menu item, fixes APRS operation to the Band dis-
played at the top of the screen. By pressing the [ ] key, the
upper and lower bands are exchanged. The APRS operation
Band is also exchanged, and the display of this setting value
changes to “OTHER BAND”.
OTHER BAND
Setting this menu item, fixes APRS operation to the band dis-
played at the bottom of the screen. By pressing the [ ] key,
the upper and lower bands are exchanged. The APRS oper-
ation Band is also exchanged, and the display of this setting
value changes to “THIS BAND”.
DATA
Sets the data transmission operating band.
1. Rotate the
FUNC knob to select [ DATA ] then press the FUNC knob.
2. Rotate the FUNC to select the DATA communication operating band, then press
the FUNC knob.