Yaesu FTM-500DR, Руководство для продвинутых пользователей

Страница: 19 / 74

19
z
Using the Back Track Function
1. In the Real-Time Navigation screen, press the SUB DIAL knob.
2. Rotate the SUB DIAL knob to select the mark ([
«
], [ L1 ] or [ L2 ]) to register the location
information for back tracking.
Marks for which location information has not been registered are displayed in gray.
3. Press the SUB DIAL knob.
• Navigation will start.
• The green point in the compass indicates the direction
of the registration point (departure point), so by
proceeding so that the green point is always on top,
the registration point can be reached. (When the
compass is in heading up display).
4. Press the [ BACK ] key to end the navigation and return
to normal operation display.
z
Changing the direction of the compass panel
The compass panel can be set to “HEADING UP” where the direction of travel is always
displayed at the top, or “NORTH UP” where North is always displayed at the top.
1. Press and hold the
FUNC knob

[ 6 COMPASS ]

Press the FUNC knob
2. Rotate the FUNC knob to select [ HEADING UP ] or [ NORTH UP ].
3. Press the DIAL knob, SUB DIAL knob or PTT switch to finish the setting and return
to the original screen.