62
DATA
69 COM PORT
Set the communication speed and parameters for the COM port DATA jack on the rear
panel of the transceiver.
1. Press and hold the
FUNC
knob key
[
69 COM PORT
]
Press the
FUNC
knob
The parameter settings screen appears.
SPEED
Setting the communication speed.
1. Rotate the
FUNC
knob to select [
SPEED
] then Press the
FUNC
knob.
2. Rotate the
FUNC
to select the desired communication speed then press the
FUNC
knob.
The setting switches as follows:
4800bps /
9600bps
/ 19200bps / 38400bps / 57600bps
OUTPUT
Select the function of COM port output.
1. Rotate the
FUNC
knob to select [
OUTPUT
] then Press the
FUNC
knob.
2. Rotate the
FUNC
to select the data output type then press the
FUNC
knob.
OFF
The COM port is deactivated.
GPS OUT
Outputs the GPS receiver satellite data.
PACKET
Outputs the AX.25 packet data from the internal modem.
WAYPOINT Outputs the APRS packet WAYPOINT beacon information of other
stations acquired from the received data.
WP FORMAT
Set the number of digits for CALLSIGN information of APRS BEACON stations,
attached to various data, when WAYPOINT is selected for OUTPUT.
1. Rotate the
FUNC
knob to select [
WP FORMAT
] then press the
FUNC
knob.
2. Press the
FUNC
to select the number of digits of the APRS beacon station call
sign information which is added to each data.
NMEA 9
Displays the last 9 digits of the call sign (Example: JA1YOE-14 is
output as “JA1YOE-14”).
NEMA 8 Displays the last 8 digits of the call sign (Example: JA1YOE-14 is
shortened to “A1YOE-14”).
NMEA 7 Displays the last 7 digits of the call sign (Example: JA1YOE-14 is
shortened to “1YOE-14”).
NMEA 6 Displays the last 6 digits of the call sign (Example: JA1YOE-14 is
shortened to “YOE-14”).
WP FILTER
Sets the type of beacon to be output when “WAYPOINT” is selected in “OUTPUT”.
1. Rotate the
FUNC
knob to select [
WP FILTER
] then press the
FUNC
knob.
2. Rotate the
FUNC
to select the beacon type you want to output then press the
DIAL
knob.
Содержание FTM-500DR
Страница 1: ...FTM 500DR FTM 500DE...
