28
In
st
a
lla
tio
n
a
n
d
C
o
n
n
e
ct
io
n
Install the controller using the provided bracket.
The bracket can be bent by hand to match the location where the controller is going to be installed.
Take due care not to injure yourself when bending the bracket.
1
Select the installation location
Select a stable, flat location with as few dents and protrusions as possible.
Also refer to “Installation location when used in a mobile unit” (
P.24).
2
Fix the bracket to the controller using the
provided screws and washers, as shown in the
drawing
Controller
Bracket
Washer
Screw
3
Peel off the protective seal from one side of the
provided two-sided adhesive sheet, and paste it
onto the bottom of the bracket
Protection
seal
Two-sided
adhesive
sheet
Peel off the other protection seal from the
underside of the two-sided adhesive sheet pasted
onto the bracket, and then stick the bracket to the
installation location
Remove all dirt and dust from the installation
location before affixing the bracket.
Protection seal
