194
C
u
st
o
m
iz
e
M
e
n
u
S
e
tti
n
g
s
a
n
d
U
s
e
r P
re
fe
re
n
ce
s
5
Touch
to select the output function of the
COM port
The setting changes as follows each time it is
touched.
“WAYPOINT”
OFF (camera): The output function of the COM port
is not used (invalid operation).
GPS OUT: Outputs the GPS data obtained by the
radio.
PACKET: Outputs the AX.25 packet communication
data received using the in-built modem
function.
WAYPOINT: Outputs the position information of
other station beacons obtained from the
APRS packets received as WAYPOINT
data.
Tip
Factory default value: OFF (camera)
6
Touch
to select the data format
This sets the number of digits in the call sign
information of the APRS beacon station appended
to each data when “WAYPOINT” is selected in Step
5 (the data will be output using the NMEA-0183
$GPWPL format).
The setting changes as follows each time it is
touched.
NMEA 9: The call sign will be limited to 9 digits on the
right (Example: The call sign information for
JQ1YBG-14 is “JQ1YBG-14”).
NMEA 8: The call sign will be limited to 8 digits on the
right (Example: The call sign information for
JQ1YBG-14 is “Q1YBG-14”).
NMEA 7: The call sign will be limited to 7 digits on the
right (Example: The call sign information for
JQ1YBG-14 is “1YBG-14”).
NMEA 6: The call sign will be limited to 6 digits on the
right (Example: The call sign information for
JQ1YBG-14 is “YBG-14”).
Tip
Factory default value: NMEA 9