Yaesu FTM-350 - APRS, Руководство по эксплуатации

Страница: 21 / 60

FTM-350 S
ERIES
O
PERATING
M
ANUAL
19
B
LUETOOTH
®
O
PERATION
O
PERATION
1. When the Bluetooth ® Headset is correctly recognized by the FTM-350 Series Trans-
ceiver, “ ” icon will appear on the transceiver’s display, and the LED indicator on the
Bluetooth ® Headset will blink blue.
2. Adjust the receiver audio level using the [
VOLUME
(
+
)]/[
VOLUME
( – )] switches on
the Bluetooth ® Headset.
3. Press the PTT switch on the Bluetooth ® Headset to transmit. Release the PTT switch
to return to receive.
4. If the
BH-2A Bluetooth ®
Headset is used, the microphone gain may be adjusted in
five steps, by pressing the [ VOLUME
(
+
)] or [
VOLUME
( – )] switches on the
Bluetooth ®
Headset while holding the
PTT
switch.
5. The communication range between the Bluetooth ® Headset and the transceiver is
around 1 m (3 ft). If you move out of range, a beep will be heard from the Bluetooth ®
Headset to alert you. If you move back into range, the Bluetooth ® Headset will beep
to alert you that you are back within range.
6. When the battery voltage of the Bluetooth ® Headset is low;
a. the LED on the
Bluetooth ®
Headset will blink Red and Blue.
b. a beep will be heard from the Bluetooth ® Headset.
c. the “ ” icon on the transceiver’s display will be blinking fast.
Charge the battery of the Bluetooth ® Headset.
In the factory default setting of the FTM-350 Series Transceiver, the internal and external
speakers, the front panel microphone, and front panel MIC jack are all disabled when the
Bluetooth ® Headset is correctly recognized. However, the microphone connected to the
transceiver’s
MIC
jack is still alive.
You may customize the
Bluetooth ®
operation via Set Mode items “ K01 BLUETOOTH ”
in the “ OPTION ” group. See page 47.