Yaesu FTM-350 - APRS, Руководство по эксплуатации

Страница: 25 / 60

FTM-350 S
ERIES
O
PERATING
M
ANUAL
23
B
ARO
/A
LTI
P
AGE
O
PERATION
The FTM-350 Series Transceiver can display the current Barometric Pressure and relative
changes in the pressure. Furthermore, when an optional FGPS-1 or FGPS-2 GPS Unit is
installed, the FTM-350 Series Transceiver can display the current altitude and relative
changes in the altitude.
First, enable the “BARO/ALTI” page, by pressing the [ SET
] key and choosing the “
DIS-
PLAY ” group. Then select the Set Mode item “ C01 DISPLAY SELECT ” and set the “BARO/
ALTI” page to ON. Press the [ ESC
] key three times to exit the Set Mode. See page 37.
To display the “Baro/Alti” Page, enable the “BARO/ALTI” page via Set Mode item “
C01
DISPLAY SELECT ” in the group, beforehand. See page 37.
1
Press the [
FWD ] or [ BCK ] key repeatedly, until the “BARO/ALTI” Page appears.
The current Barometric Pressure appears at the upper right of the display. A chart that
indicates the relative changes in the pressure (barometric chart) is presented in the left
half of the display. Additionally, if you install the optional GPS Unit, your current
altitude appears at the upper right of the display, and your current position (Longitude/
Latitude) appears at the lower right of the display.
2
Press the [
SCALE ] key to change the time scale of the barometric chart. Available
selections are “2H”, “6H”, “12H”, and “24H”.
3
Press the [ ALTI
] key to change the “barometric” chart to the “altitude” chart. You may
also change the time scale of the altitude chart by pressing the [ SCALE
] key.
4
To return to the “barometric” chart, press the [
BARO ] key.
To return to the “Radio” page, press the [
FWD
] or [
BCK
] key repeatedly, until the “Radio”
Page appears.
You may change the barometric and altitude measurement units via Set Mode item “ G10
UNIT SELECT ” in the “ SYSTEM ” group (see page 42).
: The
FGPS-2 GPS Unit requires CT-133 GPS Antenna Cable and CT-136 GPS An-
tenna Adapter.
1
2 3
4