62
Taking a Picture (Snapshot Function)
Pictures can be taken by connecting the optional camera-equipped microphone (MH-
85A11U). Captured image data can be saved onto a MicroSD memory card inserted into
the transceiver. The saved data can be displayed on the screen and transmitted to other
transceivers* as well. In addition, the most recently captured image data can be transmitted
to other transceivers* by pressing
(Send Image Button) on the camera-mounted
microphone.
* Refer to the Yaesu website or catalog for the compatible transceiver models.
Shutter Button
Press to take a picture.
Send Image Button
Sends the most recently
taken image data.
PTT Switch
Press to enable transmission,
and release to return to
receive mode.
Lens
Aim this part toward the object to photograph.
Do not touch the lens with fingers or other objects.
Microphone
Speak into this part
with a normal voice.
Connector
Connect to the DATA
terminal of the Front Panel.
Make sure to insert the
connector in the right
direction.
Connecting the microphone to the front
panel forcibly may cause damage.
• Make sure to keep at least 20 inches (50cm) distance between the lens and the object. If the
object is too close, the picture will be out of focus, resulting in a blurred picture.
• You can set the size (resolution) and image quality (compression ratio) of the image to be shot
by the following operations:
Press and hold the [
F
menu
] key → [
115 USB CAMERA
]
• If your station and the remote station are both in digital mode, you can transfer the image data
most recently taken by pressing
.
• Set the digital mode in advance to transfer images to other radios.
• Do not directly photograph objects with strong light, such as the sun or other bright objects.
Doing so can cause malfunction.
• If the lens or the microphone gets dirty, use a dry, soft cloth to wipe off the contaminants.
"MH-85A11U" cannot be transmitted by the VOX function.
