58
Dual Receive Function
The transceiver is equipped with the following 2 types of Dual Receive Functions:
z
Home Channel Priority Scan
z
A-B Dual Receive: The Operation Band and Sub Band are checked
alternately at high speed
Priority Scan
While receiving on the VFO or Memory Chanel, the transceiver checks for signals on the
HOME channel once every 5 seconds. When a signal is received on the HOME channel,
the priority scan pauses, allowing reception of the signal. When there is no signal on the
HOME channel for about 5 seconds, the transceiver will resume Priority Scan.
VFO
Priority Channel
(HOME Channel)
The transceiver monitors
signals on the frequency
registered to the Priority HOME
Channel, once approximately
every 5 seconds.
The transceiver returns to the
previous frequency quickly
and continues to receive
mode when there is no
signal.
When the transceiver receives a
signal on the frequency registered to
the priority memory channel, dual
reception stops and signal receiver
switches to priority memory channel.
z
Activating Priority Scan
1. Press and hold the [
F
menu
] key.
2. Rotate the
DIAL
knob to select [
50 DUAL RCV MODE
], then press the
DIAL
knob.
3. Rotate the
DIAL
knob to select [
PRIOITY SCAN
], then press the
DIAL
knob.
4. Press any key (except Power Switch) or
PTT
switch to finish the setting and return to
the original screen.
z
Disable the Priority Scan function
1. To cancel Priority Scan, just repeat the above procedures, selecting “OFF” in step 3
above.
A-B Dual Receive
Check if there is a signal that alternates between the operation band and the sub band at
high speed. If there is a signal in either band, it will stop instantly and continue receiving,
so simultaneous reception is not possible, but you can stand by in two bands. As soon
as there is no signal, it returns to the original frequency and resumes A-B Dual Receive.
Check for signal presence
while switching at high speed
