Yaesu FTM-200DE, Руководство по эксплуатации

Страница: 12 / 82

10
Band Scope .......................................................................... page 57
The receive status (signal strength) of the channels before and after the current frequency
can be displayed as a bar graph, whether in VFO mode or in memory mode.
Press the [
DISP
] key to display the band
scope screen. When you set the channel
with the signal you want to receive to the
center with the
DIAL
knob, the scope display
pauses and the received audio is played.
When there is no signal, the scope display is
automatically resumed.
Press : Displays the band scope
Memory auto grouping (MAG) function ............................ page 40
Memory channels can be automatically grouped and recalled for each band.
Press the [ BAND
GRP
] key in memory mode.
In the memory mode, each time the [ BAND
GRP
]
key is pressed, only memory channels of the
specified frequency band are automatically
recalled as a group, as shown below:
Press : Select the band to display
in memory mode
All memory channels
（AIR Band）
108MHz - 137MHz
memory channel
137MHz-174MHz
memory channel
400MHz-480MHz
memory channel
174MHz - 400MHz
480 MHz - 999.995MHz
memory channel
VFO Band skip function ..................................................... page 30
Bands that are not normally used can be skipped when the [ BAND
GRP
] key is pressed.
In VFO mode, press and hold the [ BAND
GRP
]
key, select the band you want to set with the
DIAL knob, and press the DIAL knob.
Then turn the DIAL knob to set “ON”
(selectable) / “OFF” (not selectable).
You can still recall from All Memory Channels
a frequency that is saved in the band set to
be skipped.
Press and hold : Display the band
select screen
Turn DIAL to select a band
Press DIAL to select ON / OFF
Memory channel

VFO copy ............................................. page 39
Transfers the recalled memory channel to the VFO with one-touch operation.
Press and hold the [ BAND
GRP
] key while
recalling a memory channel to transfer the
memory channel information to the VFO and
switch to VFO mode.
Press and hold : Copy to VFO
in memory mode