10
Connecting to a Faraway Station Using WIRES-X
Connecting to a node or room on the Internet
You can connect to the desired node or room in one of the following ways:
•
Selecting an accessible node or room from the list
•
Specifying the node name or room name
•
Selecting the most recently connected node or room
•
Specifying the DTMF ID of the node or room you want to connect to
z
Searching from the node & room lists
1
Press and hold
for over one second.
Displays the category list.
2
Rotate the DIAL to select
[ALL],
then press
.
Displays the list of accessible nodes and rooms.
Tips
• Connection destinations are displayed from the room
list and then node list.
• On the connection destination room columns, the
number of activities (the number of nodes connected
to each room) appears on the right side.
3
Rotate the DIAL to select the node or room you want
to connect to, then press
.
Starts connection.
Tip
By pressing
[PTT],
you can also establish connection while
talking.
Once connection is successfully established, the
menu list of the node (room) you are connected to
will appear.
