50
Voice Memory
The Voice Memory capability of the FTDX10 may be used to store and replay often repeated messages.
The Voice Memory includes five memories.
The Voice Memory may be operated from the Display Panel, or from the optional FH-2 Remote Control
Keypad, which plugs into the rear panel REM jack.
When performing Voice memory, a commercially available SD card is necessary.
• Recording Your Own Voice in Memory
1. Insert a commercially available SD memory
card into the SD card slot on the front of the
transceiver.
2. Select the SSB or AM mode.
When using FH-2, go to step 4.
3. Press the [FUNC] knob.
4. Touch [MESSAGE].
The “MESSAGE MEMORY” screen will be
displayed.
5. Touch [MEM] on the display or press the
[MEM] key on the FH-2.
A blinking “REC” will appear in the display.
If a [1] through [5] key (see next step) is not
pressed within five seconds, the memory
storage process will be cancelled.
6. Touch [1] through [5] on the display or press
any of the FH-2 keys numbered [1] through [5]
to select that memory storage register.
7. Press the microphone PTT switch momen-
tarily. The “REC” icon will glow steadily and
recording will begin.
● “REC” lights up on the display while record
-
ing is in progress.
● Remember that the time limit for recording
any message is 90 seconds.
8. Release the PTT switch or press the FH-2
[MEM] key to complete the message storage
process.
• Checking the Recording
1. Press the [FUNC] knob.
2. Touch [BK-IN] to turn OFF the BK-IN function.
When using FH-2, go to step 4.
3. Touch [MESSAGE].
The “MESSAGE MEMORY” screen will be
displayed.
4. Touch [1] through [5] on the display or press
the FH-2 [1] through [5] key (whichever regis-
ter was just recorded in). The “MSG” icon will
appear in the display and the audio recorded
in the Voice Memory will be heard.
● To adjust the playback volume level, turn
the [FUNC] knob or touch [RX LEVEL]
when not playing, and then turn the [FUNC]
knob to adjust.
• Transmitting the Recorded Message
1. Select the SSB, AM or FM mode.
2. Press the [FUNC] knob.
3. Touch [BK-IN] to turn ON the BK-IN function.
When using FH-2, go to step 5.
4. Touch [MESSAGE] .
5. Touch [1] through [5] on the display or press
the FH-2 [1] through [5] key (whichever
memory was recorded in). A “MSG” icon will
appear in the display and the message will be
transmitted.
● To adjust the output level during transmit,
touch [TX LEVEL] and turn the [FUNC]
knob.
Содержание FTDX10
Страница 1: ...Operation Manual...
