5
3. Touch [
OK
] to save the setting.
•
When registering in the DP-ID list is finished, “COMPLITED” is displayed for three
seconds, then the display returns to the DP-ID list screen.
•
If not registering the DP-ID, press the [CANCEL].
•
If registering several DP-IDs, repeat step 2 and 3.
•
A maximum of 24 stations may be registered.
4. Press the
PTT
switch to save the setting and return to normal operation.
•
Similarly, register all of the communicating transceivers’ DP-IDs to the DP-ID lists
of the other stations.
•
The DP-ID setting is complete.
For communicating using the DP-ID function, register the DP-ID of each other’s transceiver
on both transceivers. By registering the DP-ID, users may communicate even if the Digital
group ID (DG-ID) is a different setting
DP-ID: bbbbb
DG-ID: TX02 RX02
DP-ID: ccccc
DG-ID: TX01 RX01
DP-ID: aaaaa
DG-ID: TX01 RX01
DP-ID list
B station's DP-ID “bbbbb”
A station and C station do not register
the DP-ID of each other's transceiver
on both transceivers, but each
transceivers may communicate
because the same DG-ID is set to
both transceivers.
A
B
C
DP-ID list
A station's DP-ID “aaaaa”
DP-ID list
B station's DP-ID “bbbbb”
The transceivers may communicate
even if the Digital Group ID (DG-ID) is
a different setting because A Station
and B station register the DP-ID of
each other's transceiver on both
transceivers.
B Station may not receive the C
station's signal because B station does
not register the C station's DP-ID.
C station may receive the B station's
signal because C station register the B
station's DP-ID.
Deleting the registered DP-ID
1. Press and hold the [
DISP
] key
touch [
GM
]
touch [
1 DP-ID LIST
].
The DP-ID list is displayed.
1 JA1ZRL
2 W6DXC
3 JQ1YBF
