Yaesu FT3DR, Руководство для продвинутых пользователей

Страница: 21 / 45

21
Setting Skip Memory Channel and Specified Memory Channel
For efficient memory channel scanning, two types of memory channels may be desig-
nated, “skip memory channels” and “specified memory channels”. Set “Skip Memory
Channels” will be skipped during the memory scanning; and only “Specified Memory
Channels” will be scanned during specified memory channel scanning.
1. Recall the memory channel to skip or specify.
2. Press and hold the [
DISP ] key

touch [ MEMORY ]

[ 5 MEMORY SKIP ].
3. Rotate the DIAL knob to change as follows:
• • •

OFF

SKIP

SELECT

• • •
• SKIP : Skip Memory Channel
The “ ” at the right of the memory channel
number lights up, and then the channel is
skipped during scanning of memory channels.
• SELECT
: Specified Memory Channel
The “ ” at the right of the memory channel
number lights up, and then only designated
memory channels are scanned during memo-
ry scanning.
• OFF : Normal Memory Channel
The “ ” or “ ” at the right of the memory chan-
nel number turns OFF.
Skip Memory
Specified Memory
z
Scanning Only the Specified Memory Channels
1. Recall the memory channel registered as a specified memory channel.
2. Touch [
F MW
]

[
SCAN
].
• If [
SCAN
] is not displayed, touch [
BACK ←
] to display [
SCAN
] and then touch it.
• Only the memory channels registered as the specified memory channels are
scanned.
Unless two or more specified memory channels are registered, the specified memory
channel scanning does not function.
Skipping Unwanted Scan Frequencies (Skip Search Memory)
During the VFO scan, an unwanted frequency may be skipped by registering it to the “skip
search memory channels” in advance.
z
Set the temporary scan stop to the skip search memory
1. Press and hold the [ F MW ] key to temporarily stop the VFO scan.
2. Rotate the DIAL knob to select a skip search memory channel from 901-999.
Only skip search memory channels 901-999 may be selected.
3. Touch [
M.WRITE
].
The beep sounds, and the search skip channel is saved to memory, then the scan
resumes.
z
Specifying Unwanted VFO Scan Frequencies