Yaesu FT3DR, Руководство для продвинутых пользователей

Страница: 27 / 45

27
DTMF Operation
DTMF (Dual Tone Multi Frequencies) are the tone signals sent to make telephone calls,
or control repeaters and network links. Up to 10 registers of 16-digit DTMF tone codes
can be stored as telephone numbers to make calls through the public telephone network
using a phone patch or connect through the WIRES-X analog node station.
Setting the DTMF Memory
1. Press and hold the [
DISP
] key

touch [
SIGNALING
]

[
5 DTMF MEMORY
].
2. Rotate the DIAL knob to select the desired channel (1 to 10) to register the DTMF
code, then press the [ DISP ] key.
The DTMF memory channel input screen is displayed.
3. Use the numeric keypad or DIAL knob to input the DTMF code maximum of 16 digits.
• Using the DIAL knob:
The DTMF codes from 0 to 9 may be input.
• • •

0 to 9

A to D

＊

-

#

• • •
4. Press the PTT switch to save the setting and return to normal operation.
Transmitting the Registered DTMF Code
1. Press and hold the [ DISP ] key

touch [ SIGNALING ]

[ 4 DTMF MODE ].
2. Rotate the DIAL knob to select the “ MODE ”.
3. Press the [ DISP ] key, and then turn the DIAL knob to select the setting.
AUTO ： The registered DTMF code is automatically transmitted.
MANUAL : The DTMF code may be transmitted manually by pressing each numeric
key.
4. Press the PTT switch to save the setting and return to normal operation.
When set to “
AUTO
”, the DTMF icon “ ” will be shown on the display.
Transmitting DTMF code automatically using DTMF memory
1. Set “ AUTO ” by referring to “Transmitting the Registered DTMF Code” (above).
2. While pressing and holding the PTT switch, touch [ DTMF ].
3. Touch a numeric [ 0 ] to [ 9 ].
• The DTMF code registered in the DTMF memory channel is automatically trans-
mitted.
• Even after releasing the PTT switch, the transmission continues until the DTMF
code is completed. The transceiver is automatically returned to receive mode.
Manually Transmitting the DTMF Code
1. Set “ MANUAL ” by referring to “Transmitting the Registered DTMF Code” (above).
2. While pressing and holding the PTT switch, touch [ DTMF ].
• Touch each corresponding key to send the DTMF code
• The transmission may continue for one second after releasing the PTT switch.