16
3. Rotate the
DIAL
knob to select
4. Touch [
DEL
].
Confirmation screen “
DELETE
?” is displayed.
5. Touch [
OK
] twice.
•
The memory channel is deleted from the CAM group
and the list display returns.
•
To cancel the deleting, touch [
CANCEL
].
CY02 005 445.212.50
BL03 006 445.312.50
-------------------
LX01 001 445.012.50
Memory Channel List
Since memory channels are displayed in a list, you can easily recall the memory by
checking the frequency and memory tag display.
1. Touch [
F MW
]
[
MEMORY
]
.
•
If [
MEMORY
] is not displayed, touch [
FWD →
] to dis-
play [
MEMORY
] and then touch it.
•
You can switch between memory tag display and fre-
quency display by press and hold the [
V/M
] key.
•
The “ ” icon is displayed at the left of memory chan-
nels set as skip memory, and the “ ” icon is displayed
at the left of memory channels set as specified memo-
ry.
2 439.700.00
3 145.620.00
4 432.500.00
1 145.030.00
2. Rotate the
DIAL
knob to select the desired memory channel.
3. Touch [
ENT
] to recall the selected memory channel and enter memory mode.
The Memory Channel Only Mode
The FT3DR/DE may be set to operated only in the registered memory channels.
1. While pressing the [
V/M
] key, press and hold the POWER switch to turn the trans-
ceiver ON.
•
The memory channel only mode is ON, the previously selected memory channel is
recalled.
•
Rotate the
DIAL
knob to select the memory channels.
•
Touch the frequency display to display the numeric keypad, enter a 3-digit memory
channel number, and then touch [
ENT
] to recall the memory channel.
•
In the memory only mode, only the following functions will operate:
•
Changing the communication mode (touch [
MODE
])
•
The transmission mode setting of the AMS function (touch [
AUTO
], [
TX FM
] or [
TX DN
])
•
Group monitor (GM) function (press the [
GM
] key)
•
WIRES-X function (press the [
X
] key)
•
Audio level adjustment
•
SQL level adjustment (press the [
SQL
] key)
•
Key lock function (press the
POWER
switch)
•
Pressing the [
V/M
] key, will sound the beep, “
M-ONLY
” will be displayed, and the function
will not operate.
z
Canceling Memory Only Mode
1. Turn the transceiver OFF; and then while pressing the [
V/M
] key, press and hold the
POWER
switch to turn the transceiver ON.
