56
Using the Memory
A Wide Variety of Memory Functions
4
Touch
[M.WRITE]
.
The frequency registration will initiate.
If you attempt to register a frequency to a memory
channel on which another frequency has already
been registered, “OVERWRITE?” will appear on
the LCD.
When
[OK]
is selected, touch
[OK]
to register the
frequency to the memory channel.
Once the registration is completed, the VFO
frequency will again appear on the display.
Tips
• By default, 144.000 MHz is registered to the memory channel 1. It can be changed to another
frequency, but cannot deleted.
The frequency which has been registered to a memory channel can be overwritten with a new
frequency.
When registering a frequency to a memory channel, an unregistered memory channel automatically
appears.
• To display the lowest unregistered memory number when registering a frequency to a memory
channel, press and hold
key for over one second to enter Set mode, and then select
[MEMORY]
→
[6 MEMORY WRITE]
.
• To inhibit registration to all memory channels, press and hold
key for over one second to
enter Set mode, and then select
[MEMORY]
→
[4 MEMORY PROTECT]
.
Split Memory
Two different frequencies, one for receive and another for transmit, can be registered to
a memory channel.
1
Register a receive frequency to a memory channel.
Remark
See “Registering to Memory Channel” above.
2
Set a transmit frequency in VFO mode.
3
Touch
[F MW]
for over one second.
4
Rotate the DIAL to select the channel that the receive frequency was registered to.
5
While pressing , touch
[M.WRITE]
.
When the memory channel to which two different
frequencies (one for receive and the other for transmit) is
recalled,
@
appears on the LCD.
