80
Scanning Function
Memory Channel Scanning
8
Press the
key to enter Memory mode.
9
Touch
[F MW]
.
10
Touch
[BANK]
.
11
Press the
key.
12
Rotate the DIAL to select the memory bank to begin memory scanning from.
The memory bank number is changed from [B] to [b] and
the bank link scanning is activated.
13
Press the
key.
The memory banks for which you perform memory bank
link scanning are determined.
14
Touch
[F MW]
.
The function menu screen appears.
15
Touch
[SCAN]
.
Tips
•
Scanning is performed toward the higher memory
channel numbers.
•
Rotate the DIAL clockwise: Scanning is performed
toward the higher memory channel numbers.
•
Rotate the DIAL counterclockwise: Scanning is performed toward the lower
memory channel numbers.
•
When a signal is received during scanning, scanning stops for 5 seconds and
this frequency is received.
•
When scanning is suspended, the decimal point blinks and the LCD stays lit.
•
After receiving the frequency for 5 seconds, scanning resumes.
•
To stop scanning, touch
[STOP]
or press .
•
You can select the range for scanning by pressing and holding the
key for
over one second to enter Set mode, then selecting
[SCAN]
→
[5 SCAN WIDTH]
.
y
Canceling Bank Link Scanning
1
Press and hold the
key for over one second.
The transceiver enters Set mode.
2
Touch
[MEMORY]
.
3
Touch
[1 BANK LINK]
.
4
Rotate the DIAL to select the memory bank.
5
Press the
key.
The memory bank display is changed from
☒
to
□
and the bank link scanning is
deactivated.
6
Repeat steps 4 and 5 to select other memory banks.
7
Press .
The transceiver exits from Set mode.
The memory bank number is
changed from [B] to [b]
