51
Basic Operation
Miscellaneous Settings
Restoring to Defaults (All Reset)
To restore all transceiver settings and memory content to the defaults.
1
Press and hold for over one second, then turn off the transceiver.
2
While pressing
,
and
,
press .
The transceiver turns on and you hear the beep.
3
When the beep sounds, release the key.
“ALL RESET?” appears on the LCD.
4
Touch
[OK]
.
A beep sounds and the call sign input message appears
on the LCD.
Remark
To cancel resetting, touch
[CANCEL]
.
5
Press the
key.
The call sign input screen appears.
6
Input your call sign.
Switch the display between the alphabet keys and number
keys to input the call sign.
7
Press .
The call sign is set and the frequency screen appears.
Caution
When the All Reset function is performed, all data registered in the memory will be deleted. Be sure to
note the settings on paper or back up the data on a microSD memory card. For details on how to save
backup onto a microSD memory card, see “Set Mode: SD CARD Menu Operations” on page 154.
Tip
To restore only the Set Mode settings to default, while pressing
and
, press to turn on
the transceiver.
