18
Connecting to a Faraway Station Using WIRES-X
●
Disconnecting from a node or room
1
Press and hold
B
for 1 second or more
If disconnection is successful, [Not Connected] will be
displayed.
Tip
Once [Not Connected] has appeared, the display will return to
the local node connection screen.
䢢䢢䢢䢢䣛䣃䣇䣕䣗䢯䣖䣕䣗䣔䣋䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢢䢷
䢢
䣐䣱䣶䢢䣅䣱䣰䣰䣧䣥䣶䣧䣦
Releasing the WIRES-X connection
Press and hold
%
for 1 second or more. The display will return to the frequency
screen, and the [X] to the left of the frequency will disappear.
Tip
The local node and connection destination nodes or rooms will remain connected.
䢶䢵䢲䢰 䢺䢲䢲䢢
䣆䣐
䣌䣓䢳䣛䣄䣉䢯䣐䣆䢳䢢䣕䣊䣋䣐䣃䣉䣃䣙
䣌䣃䢴䣛䣕䣑䢯䣐䣆䢴䢢䣐䣃䣉䣑䣛䣃
%
→
䢶䢵䢲䢰 䢺䢲 䢲䢢
䣆䣐
䢶䢵䢵䢰 䢺 䢸䢲
䢢
䣈䣏
Connecting to an analog node
When the desired node is an analog station, use the DTMF function on the transceiver.
For details on how to use the DTMF function, refer to “Using the DTMF Function” in the
basic operating manual.
Connecting to a node or room on the Internet
1
Set the main band frequency to the local node frequency
2
Press
%
to switch to analog FM mode
Tip
For details, refer to “Switching the communication mode” in the basic operating manual.
3
While pressing
p
, press the DTMF ID key of the node or room where you want to
connect
The DTMF code will be delivered.
4
Release
p
, and keep the FT1DR/DE in receiving mode for about 10 seconds
Once connection is established, you will be able to hear audio.
Caution
The connection destination screen will not appear.
Tip
You can store DTMF codes consisting of up to 16 digits for 10 channels on the FT1DR/DE. If you
register the codes of frequently-used connection destinations in advance, you can easily transmit a
code by pressing its abbreviated number while pressing
p
. For details, refer to “Using the DTMF
Function” in the basic operating manual.
Communicating with others
1
Press
p
The FT1DR/DE will switch to transmit mode.
