Page 115
FT
DX
9000D O
PERATION
M
ANUAL
The memory system of the FT
DX
9000D allows storage and recall of up to 99 memories, each storing frequency, mode, and
a wide variety of status information detailed previously. Memories may be grouped into as many as six Memory Groups,
and additionally you get nine pairs of band-limit (PMS) memories along with five QMB (Quick Memory Bank) memories.
M
EMORY
S
TORAGE
1.
Set the Main (VFO-A) band up with all frequency,
mode, and status the way you want to have it stored.
2.
Press the A
M button (#
) momentarily (the cur-
rent channel number will start blinking); the contents
of the current memory channel will be shown on the
Sub (VFO-B) display field.
3.
Press the MCH/GRP key (#
) momentarily.
When you press the MCH/GRP switch, the Red
LED imbedded within the switch should light up, in-
dicating that you are ready to choose a channel into
which to store the data.
Advice
H
If the Red LED imbedded in the MCH/GRP switch does
not light up, check to be sure that the orange lamp to the right
of the CLAR/VFO-B knob (#
) is not illuminated. It is,
press the A/B switch (#
) to make it go out, then press
the MCH/GRP] key again.
4.
Rotate the CLAR/VFO-B knob to select the memory
channel onto which you wish to store the data. If you
have selected a channel on which data is already stored,
that frequency will appear on the Sub (VFO-B) band’s
frequency display field.
5.
Press and hold in the A
M key for two seconds to
store the frequency and other data into the selected
memory channel. A double beep will confirm that you
have held the A
M key in long enough.
M
EMORY
C
HANNEL
R
ECALL
1
Press the V/M switch (#
), if necessary, to enter
the Memory mode. A memory channel number will
appear in the multi-panel window.
2.
Press the MCH/GRP key (#
) momentarily.
The Red LED inside the switch will light up, indicat-
ing that you are ready to recall a memory channel.
Advice
H
If the Red LED imbedded in the MCH/GRP switch does
not light up, check to be sure that the orange lamp to the right
of the CLAR/VFO-B knob (#
) is not illuminated. It is,
press the A/B switch (#
) to make it go out, then press
the MCH/GRP key again.
3.
After pressing the MCH/GRP key, you may rotate
the CLAR/VFO-B knob to select the desired
memory channel.
M
EMORY
O
PERATION
Advice
To work within a particular Memory Group, press and hold
in the MCH/GRP key for two seconds. The imbedded
LED will glow Orange; now press the MCH/GRP key
momentarily, and the LED will change to Red; you many
now choose the channel within the selected Memory Group.
CLAR/VFO-B knob
A
M key
MCH/GRP switch
V/M key
CLAR/VFO-B knob
V/M key
MCH/GRP switch
Содержание FT DX 9000D - COMPUTER AIDED TRANSCEIVER
