background image

FT

DX

9000 TFT O

PERATION

 M

ANUAL

E

RASING

 

A

 M

EMORY

 C

HANNEL

/R

ESTORING

 

AN

 E

RASED

 M

EMORY

 C

HANNEL

You can erase data from any memory channel which is no longer needed.  It also is possible to restore (immedi-
ately after deletion) erased memory channel data, in case you erase something by accident.

U

SING

 

THE

 M

EMORY

 C

HANNEL

 L

IST

1.

Select the memory channel you want to erase by
pressing the [

F6

](

T

) key or [

F7

](

S

) key.

2.

To mask the current memory's contents, press the
[

F5

](

MASK/RESTORE

) key. If you want to re-

store the erased memory channel’s data, press
the [

F5

](

MASK/RESTORE

) key once more.

Advice

: Memory channel which has been erased can

be restored by pressing the [

F5

](

MASK/RESTORE

)

key again, but if any other key has been pressed
after you erased the memory channel, the memory
cannot be restored.

S

AVING

 M

EMORY

 D

ATA

Memory data from the 

FT

DX

9000D

’s internal memory may be saved to the supplied Compact Flash (CF) card.

1.

Press the [

F3

](

SAVE

) key to open the Save win-

dow.
If there are several file names stored, select the
desired file by pressing the [

F6

](

T

) key and

[

F7

](

S

) keys.

Ï

Press 

[

F5

](

MASK/RESTORE

)

Ø

Ï

Press 

[

F3

](

SAVE

)

Ï

Press 

[

F3

](

GO

)

2.

If you want to over-write the file name, go to step 3.
If you do not want to over-write the data on an
existing file name, and want to save the data in the
new file. Press the [

F4

](

FILE

) key; now enter the

desired file name from your keyboard (the file ex-
tension will be “.mcl” for Menu data).

3.

Press the [

F3

](

GO

) key to save the data into the

CF card.
If you want to cancel the saving of the memory
data, press the [

F2

](

CANCEL

) key.

Advice

: When the ERROR message “PLEASE

CHECK A DISK” appears on the right side of the
MEM CARD notation, please confirm that the CF card
is inserted correctly into its slot.

When memory data is saved in the CF card under a
previously-used file name, the old/previous data will
be revised and the old data erased.

Page 40

Содержание FT DX 9000 TFT





















































Отзывы: