Yaesu FT-897D, Руководство по эксплуатации

Страница: 69 / 76

Page 67 FT-897D O
PERATING
M
ANUAL
E
XTERNAL
A
UTOMATIC
A
NTENNA
T
UNER
“FC-30”
I
NSTALLATION OF
O
PTIONAL
A
CCESSORIES
Parts List
Screws (M3 x 6B) ........................................................ 2
Screws (M3 x 6B) ....................................................... 6
Mounting Plate A .............................................................. 1
Mounting Plate B .............................................................. 1
Mounting Plate C .............................................................. 1
Installation
1. Turn the transceiver’s power off, and disconnect all
cables from the transceiver.
2. Screw the mounting plate “ A ” to the FC-30 using the
supplied screws ( Figure 1 ).
3. Remove the four rubber lugs and their four screws (
Fig-
ure 2 ), then position mounting plates “ B ” and “ C ” so
that their holes align with those on the FT-897D , and
secure using the supplied screws (
Figure 3
).
4. To install the FC-30 , position the FC-30 so that the
mounting plate “ A ” on the side fits into the mounting
plate “
B
” on the
FT-897D
(
Figure 3
), then screw the
mounting plate “ C ” (on the FT-897D ) to the FC-30 us-
ing the supplied screws ( Figure 1 ).
See page 41 for connection of the
FC-30
/
FT-897D
and op-
erating procedure.
Do not install the supplied FC-30 Mounting Screws
if you are not installing the FC-30! Also, do not
use an improper screw for mounting the FC-30! An im-
proper screw may cause a “short circuit” to the internal
circuitry, causing serious damage!
Plate A Plate B Plate C
Figure 2
Figure 1
Figure 3
Plate B
Plate C
Plate A