Yaesu FT-897D, Руководство по эксплуатации

Страница: 15 / 76

Page 13 FT-897D O
PERATING
M
ANUAL
F
RONT
P
ANEL
C
ONTROL
& S
WITCHES
CLAR
Knob
This knob tunes the clarifier offset frequency up to ±9.99
kHz, when the Receiver Clarifier feature is activated by
pressing the
CLAR/IF SHIFT
key.
BAND
(
DWN
)
/BAND
(
UP
)
Key
Pressing either of these keys momentarily will cause the
frequency to be moved up or down by one frequency
band. The selections available are:
…1.8 MHz 3.5 MHz 7.0 MHz 10 MHz
14 MHz 15 MHz 18 MHz 24 MHz 28
MHz 50 MHz 88 MHz 108 MHz 144
MHz 430 MHz 1.8 MHz …
Recalling the 5 MHz band (U.S. model) requires differ-
ent procedure. See page 23 for details.
MEM/VFO CH Knob
This detented rotary switch is used for VFO frequency
tuning, memory selection, and function selection for the
[
A
], [
B
], [
C
] keys of the transceiver.
DSP Button
Pressing this button momentarily provides instant access
to Multi Function Row “p” (
MFp ), which contains the
command key for the receiver’s Digital Signal Process-
ing system. The available functions will appear as the
functions displayed above the [
A
], [
B
], and [
C
] keys, as
described previously.
HOME
Key
Pressing this key momentarily recalls a favorite “Home”
frequency memory.
V/M
Key
Pressing this key switches frequency control between the
VFO and Memory Systems.
MODE
( )
/MODE
( )
Key
Pressing either of these keys momentarily will change
the operating mode. The selections available are:
… USB
LSB CW CWR
AM DIG PKT USB …
DSP
Indicator
This indicator glows green when the DSP feature is acti-
vated.
TRANSMIT/BUSY Indicator
This indicator glows green when the squelch opens, and
turns red during transmit.
CW-T
Indicator
This indicator is a visual tinning indicator for CW re-
ception, which glows green in synchronization with a
signal tuned to the center of the IF passband during CW
reception.
BATT-A , BATT-B Indicator
These LEDs indicate the battery status for the optional
FNB-78 Ni-MH battery pack while internal battery op-
eration.
The LED glows green when the battery pack is waiting
(switch to off by the
A-B switch on the top panel), and
turns orange when the is the battery pack en the radio op-
erate the corresponded battery pack by the
A-B switch on
the top panel. When the battery voltage is approaching the
value which indicates depletion is near, the LED blinks
orange, indicating it is time to replace the batteries.
Supply Voltage
Meter Status
: S meter
: PO meter
: Modulation Meter
: SWR Meter
: ALC Meter
Multi Function Key Status
: Key Lock “ON”
/ : Fast Tuning Step
Operating Frequency
: IPO Active
: ATT Active
: VOX Active
: Priority Active
: Dual Receive Active
DCS Active
Operating Mode
APO Active
: ATAS-100/-120 or FC-30 Active
: HI SWR (more the “3.0”)
: HI Temperature
: IF SHIFT Active
: Clarifier Active
Transverter Mode
CTCSS/DCS Status
: CTCSS ENC Active (Split Tone “ON”)
: CTCSS ENC Active (Split Tone “OFF”)
: CTCSS ENC/DCS DEC Active (Split Tone “ON”)
: CTCSS ENC/DEC (Tone Squelch) Active (Split Tone “ON”)
: DCS ENC Active (Split Tone “ON”)
: DCS ENC Active (Split Tone “OFF”)
: DCS ENC/DEC Active (Split Tone “ON”)
: DCS ENC/CTCSS DEC Active (Split Tone “ON”)
: CTCSS ENC/DEC (Tone Squelch) Active (Split Tone “OFF”)
: DCS ENC/DEC Active (Split Tone “OFF”)
: Odd Split
: Minus Shift
: Plus Shift
VFO A/B or
Memory CH Number
Battery Operation
LCD Details