Set up the Memory Programmer
Installing the SCU-35 driver software
Preparation
Download the SCU-35 driver software from the Yaesu Website (http://www.yaesu.com/).
Extract the downloaded (PL2303_Prolific_DriverInstaller_v****.zip) file.
Start up the computer as an “Administrator” user.
Before installing the driver, make sure that the SCU-35 Programming Cable is
disconnected from the computer.
SCU-35 Driver Software Installation
1. Double-click the “PL2303_Prolific_DriverInstaller_v****.exe” file, in the same
unzip folder.
When the [User Account Control] dialog box opens, click the [Yes].
2. The dialog box, which is shown at the right,
will open. Click the [Next], to initiate the in-
stallation of the driver.
3. When the installation is finished, the dialog
box shown right will open. Click the [Finish],
to complete the installation of the driver.
4. Connect the SCU-35 Programming Cable to the USB jack on the computer.
•
The SCU-35 Programming Cable will be recognized automatically.
•
Confirm that the SCU-35 driver is installed correctly, If the driver fails, proceed
to “When the Driver Software Installation Fails” on the next page.
5. Click the [Start] button in the tool bar, then right-click the [Computer] button.
6. Click the [Properties], then click the [Device Manager] button.
7. When the [User Account Control] dialog box opens, click the [Yes] button.
4
FT-65R/E FT-25R/E Memory Programmer
