Menu Bar
Set menu
Set COM
Set the Comm Port number of the SCU-35 driver.
This [Set COM] selection operates the same as clicking the icon in the figure at the
above right.
Set Initialization
Initialize the configuration content of the Memory Programmer.
If the present configuration has not been saved to the disk, you will be prompted to con-
firm whether or not you wish to save the new data.
Program menu
Read From Radio
This command transfers the settings data of the FT-65/25 to the memory programmer.
This [Read From Radio] operates the same as the right icon in the figure above.
Read data may be stored to the computer files, using the [Save] or [Save as]
commands in the [File] menu.
For details, see “Read the settings from the transceiver”.
Write To Radio
This command downloads the Memory Programmer data from the computer to the FT-65/25.
This [Write To Radio] selection operates the same as the right icon in the figure above.
For details, see “Write the settings to the transceiver”.
15
FT-65R/E FT-25R/E Memory Programmer
