Yaesu FT-51R, Руководство пользователя

Страница: 77 / 78

Resetting the
CPU
As
a last resort, if you are unable to gain
control
of
the transceiver,
the
FT-51R can
be
reset
from the
keypad
to clear all settings, memories,
channel step and repeater shifts
defaults. Just press and hold the
and
together while turning the transceiver on.
Display
Test
TSETABC
To check all
LCD
display indicators,
seg-
ments and the
U H F
LEDs, turn
the radio
off, then hold the while turning the
transceiver on.
All
display
indicators, segments
and
LEDs
remain on. Turn the radio off then on
again to restore operation to as before.
SKIP T SQ
LOW
SKIP T
SQ
TPAGECODE MUTE
Display Test
FCC Warning (for
USA
This transceiver generates and utilizes radio
frequency (RF) energy. Unapproved modifi-
cations performed on the circuitry of this
equipment may cause harmful interference,
and could result in damage to the transceiver.
With the exception of MARS (Military Affili-
ate Radio Service) and CAP (Civil Air Patrol)
operators possessing valid authorization,
transmit range modifications and the use of
amateur radio
(non-FCC type-accepted) equip-
ment on frequencies outside of allocated ama-
teur bands is
illegal!
This includes amateur
operators who are members of public service
(police, fire, rescue) agencies and also applies
to marine band (VHF
&
HF) operation. Opera-
tors performing unauthorized modifications,
possesing or operating modified equipment
in this manner jeopardize losing priviledges
to operate this equipment and may be subject
to fines and legal action in accordance with
FCC rules and regulations.
In accordance with the Communications Pri-
vacy Act, intentional interception of Cellular
Telephone frequencies (conversations) is pro-
hibited.