Yaesu FT-51R, Руководство пользователя

Страница: 34 / 78

Press and hold the switch while pressing
@once more momentarily (this does not
key the transmitter).
Whenever you recall a separate transmit fre-
quency memory, appear together above
the appropriate
T
frequency display. Again, you
can press
(REV)
to display the transmit frequency,
and the shift symbols will blink. You can also
press
to cancel repeater shift (tempo-
rarily, until you change channels).
After storing a memory with a separate trans-
mit frequency, rewriting the receive frequency
also
deletes the separate transmit frequency.
Tuning Memories
While receiving on a recalled memory, you
can retune it and change other memorized set-
tin
s such as repeater shift) by first pressing
now precedes the memory channel
number, and you can tune in the same way as
described before (including 1-MHz steps).
To
store a new frequency or setting in the current
(or other), memory: press and hold for
second, select a new memory (if desired), and
press
again momentarily. Operation re-
mains on the (new) memory as the old memory
reverts to its original state.
RPT NO
SKIP
Once you have retuned a memory, if
don’t want to save your changes, just press
to return to the original memory data.
Masking Memories
If you regularly move from one area to an-
other, you may want to use certain memories at
specific locations or times. You can temporarily
mask undesired memories from operation (ex-
cept memory channel and re-enable them any
time later when needed.
To do this:
Recall the memory to be masked, then press
and hold
for %-second (until blinks).
Press the display changes to the memory
channel
1,
and the previously selected mem-
ory is no longer selectable manually, or by
scanning (described
To unmask a hidden memory for operation,
Recall any memory, then press and hold
Use the
DIAL
or to select the mem-
Note! Be careful not to overwrite hidden memo-
ries accidentally (you cannot recover the pre-
vious contents).
for %-second (until blinks).
ory to be restored, then press
A
to finish.
U
h
n
M
Y
P
ir
b