Yaesu FT-25E, Руководство по эксплуатации

Страница: 44 / 52

Item
(lower menu
item)
Function Values Default Value
21 PAGER Setting the TX CTCSS
of 2 tone and the RX
CTCSS of 2 tone.
Enables/disables the
Answer Back function. TX: ** **
RX: ** **
ACK : ON / OFF TX=05 47
RX=05 47
ACK=OFF
22 PASSWORD Enables/disables the
Password feature OFF / ON / OFF
23 PRI.RVT Enables/disables the
Priority Revert feature. RVT.OFF / RVT. ON RVT.OFF
24 REPEATER ARS / MODE / SHIFT
function setting ARS= ON / OFF
MODE=SIMPLEX / +RTP
/ -RTP
SHIFT= 0.05 MHz - 99.95
MHz (per 50KHz) ARS=ON
MODE=SIMPLEX
SHIFT=**.**M (
* )
25 RESUME Selects the Scan
Resume mode. BUSY / HOLD / TIME BUSY
26 RF SQL Adjusts the RF Squelch
threshold level. S-1 / S-2 / S-3 / S-4 / S-5
/ -6 / S-8 / S-FULL / OFF OFF
27 SCN.LAMP Enables/Disables
the Scan lamp while
paused. ON / OFF ON
28 SKIP
(SKIP SCAN)
Selects the Memory
Scan “Skip” channel-
selection mode.
− −
29 SQL TYPE Selects the Tone
Encoder and/or
Decoder mode. OFF / R-TONE / T-TONE
/ TSQL / REV TN / DCS /
PAGER OFF
30 STEP Setting of the frequency
steps. 5 / 6.25 / 10 / 12.5 / 15 /
20 / 25 / 50 / 100 kHz, or
AUTO AUTO
31 TOT Setting of the TOT
time. 1 min - 30 min (per 1
min) or OFF 3min
32 TX PWR Selects TX Power HI(5W) / MID(2.5W) /
LOW(0.5W) HI(5W)
42
Set (Menu) Mode
FT-25R/FT-25E Operating Manual