Yaesu FT-25E Скачать руководство пользователя страница 9

Страница: 9 / 52

WARNING

Do not power this transceiver

with a voltage other than the

specified power supply volt-

age.

A fire, electric shock, or damage

may result.

Do not use the battery pack for

any model other than the spec-

ified transceiver.

A fire, leak, overheating, explo-

sion, or ignition can result.

Do not make very long trans-

missions.

The main body of the transceiver

may overheat, resulting compo-

nent failure or operator burns.

Do not disassemble or make

any alteration to this product.

An injury, electric shock, or failure

may result.

Keep the terminals of the bat-

tery pack clean.

If terminal contacts are dirty or

corroded, a fire, leak, overheat-

ing, explosion, or ignition can

result.

Do not handle the battery pack

or charger with wet hands. Do

not insert or remove the power

plug with wet hands.

An injury, leak, fire, or failure may

result.

If smoke or a strange odor is

emitted from the main body,

battery pack, or battery charger,

immediately turn the transceiver

off; remove the battery pack,

and remove the power plug from

the outlet.

A fire, chemical leak, overheat-

ing, component damage, ignition,

or failure may result. Contact the

dealer from which you purchased

this product or Yaesu Amateur

Customer Support.

Do not use the battery pack

which is externally damaged or

deformed.

A fire, leak, heating, explosion, or

ignition can result.

Do not use any battery charger

which is not specified by Yaesu.

A fire or failure can result.

When transmitting, keep the

transceiver at least 5.0 mm (3/16

inch) away from your body.

Use only the supplied antenna.

Do not use modified or damaged

antennas.
If charging of the battery pack

cannot be completed within the

specified charging time, imme-

diately remove the power plug

of the battery charger from the

outlet.

A fire, leak, overheating, explosion,

or ignition can result.

Safety Precautions (Be Sure to Read)

FT-25R/FT-25E Operating Manual

Содержание FT-25E





















































Результаты поиска

Содержание FT-25E

Отзывы:

Похожие инструкции для FT-25E

Бренды по названию

Популярные бренды

Yaesu FT-25E, Руководство по эксплуатации

Результаты поиска

Содержание FT-25E

Отзывы:

Похожие инструкции для FT-25E

Бренды по названию

Популярные бренды