Yadea M6L, Сервисное меню

Страница: 52 / 66

Charger
Overview
Vehicle charger protection function
12 小时
300mA ± 100
Charger fault repair determination method
1. Check the charger plug
Can't charge if the indicator light is off. Yes
Yes
Input and output plugs are in poor contact
No
2. Observe the charger indicator light
Whether the lights are not lit Charger faulty
No
Intermittent failure
L
N
10A 250V~
TH 006
46
Charger is a device to replenish the energy for the battery of the vehicle. The charger of this vehicle is an
intelligent charger with multiple protection, such as overcurrent, short circuit, flowing backward prevention,
input overvoltage, output open circuit, internal temperature protection and minimum charge limit.
-
+
Connect
Connect
Overheat protection
Off after fully charged
Timed off
When the charge is saturated and the power cord unplugs the charger and the
battery is still connected, the battery does not pour electrical energy into the
charger.
Recharge prevention
Output overcurrent
protection
≥ 110%Iout
Enter undervoltage
protection
Enter overpressure
protection
When the input AC voltage 260+10V, enter the input overvoltage protection.
When the input AC voltage 180+10V, enter the input undervoltage protection.
When the battery is connected in reverse, the charger will cut off the connection
between the internal circuit and the battery and will not start charging to prevent
damage.
Back-up protection
In case of unexpected short circuit of the charger output, the charger will auto-
matically close the output. After troubleshooting, the charger shall be restarted.
When the internal temperature of the charger exceeds 70°C, the charging current
will automatically reduce. When the temperature exceeds 80°C, the charger will
shut down for protection. When the temperature drops, the charger will automati-
cally resume charging.
Short-circuit
protection
Electrical system