33
34
1.Check whether the reflector is dirty and damaged and
do not use it if there is dirty or damage.
1.Turn the power switch clockwise to turn around the throttle.
2.Check power supply and lighting circuit. The front and
rear brake system. Reflector. Handlebar and front and rear
wheel. Parts such as tires ensure that there is no
abnormality in the bicycle.
3.Hold the handlebars with both hands, stabilize the bicycle
hit the main support or the side support to make the rear
wheel land, support the ground with the left foot and place
the right foot in the pedal position. After you are seated on
the bicycle, slowly rotate the speed control knob
counterclockwise inward, and the bicycle will start to run.
Damage or contamination of the reflector
1.Swing the bicycle up and down, back and forth, left and
right, and check the handlebars and front and rear wheel
fixing screws for looseness.
2.Whether the handlebar steering is too tight or bumpy.
3.Push the bicycle forward and backward, and check
whether the front and rear wheels rotate smoothly
and whether there is abnormal noise.
Inspection of handlebar and front and rear wheel
Correct driving Start and driving
1.Turn on the power supply, operate the lighting switch,
and check whether the headlights and taillights are on
and whether the headlights are normal.
2.Operate the turning switch, check whether the turning
indicator is working properly.
3.Check whether the appearance of lighting and signaling
devices are damaged.
4.Check whether the power line connection of the whole
scooter is stable and whether the binding posts and
connectors are loose.
1.Check whether the power-off function of front and rear
brake lever reducer is normal before and after
respectively. Whether the reducer brake system
is flexible to operate.
2.Check whether the braking performance and braking
distance are abnormal. If abnormal phenomena such as
soft brake, long braking distance, worn brake pads, low
flour of brake fluid or leakage of fluid were found,
please contact the dealer.
Inspection before riding
Inspection of power supply circuit and
lighting circuit
Inspection of front and rear brake
