29
30
The assembly of the front fender
The assembly of the pedal
The assembly of the seat tube
The assembly of the reflector and the ring bell
1.Tool: a cross screwdriver
2.It affiliates your riding if you install
the ring bell on the left
1.Tool: a M5 hexagon screwdriver.
2.Lock the lifting eye as the pic, and
then adjust to make it have a safety
distance with the tire.
1.Tool: a M5 hexagon screwdriver.
2.Lock the lifting eye as the pic, and
then adjust to make it have a safety
distance with the tire.
1.Tool: 15# open spanner
2.Twist the pedal clockwise
3.Torque
：
350KGf.cm-450KGf.cm
34N.m-44N.m
1.Insert the seat tube into the frame.
(Refer to the pic.)
2.Adjust the saddle to make sure you
sit on the saddle comfortably.
3.Make sure the seat tube is in line
with the tube of the frame.
1.Do not expose the safety line.
2.Buckle the quick-release handle.
Locked at the position of CLOSE
1.Tool
：
Cross screwdriver.
2.Install the reflector.
3.Usually, the rear reflector is red.
1.Tool: cross screwdriver.
2.Have the reflector assembled on the
frame. Adjust the degree to have the
reflector in parallel with the horizon.
3.Usually the front reflector is white.
