
Mode
Notes
DHCP
Magic
This signal is usually sent once after the power
on, because over the 8 next seconds the mode
is changing to DHCP Client or DHCP Server.
Static
IP
No problems detected, Gateway using the
fixed IP address assigned by user (192.168.4.1
by default).
Static
IP
IP address conflict is detected; some other
device has the same IP address as the
Gateway.
DHCP
Client
The device obtained a dynamic IP address
from the DHCP server or router; also sent
when switches from DHCP Magic mode.
DHCP
Client
Device is configured to DHCP Client mode,
but cannot receive an address from the DHCP
server or network router.
DHCP
Server
This signal means that the Gateway issued
the address to one or multiple client devices
on the network.
DHCP
Server
No addresses issued to other devices (they can
be configured for static IP); also used when
mode was switched from DHCP Magic.
Note, that the duration of the last flash (two times longer than previous) in the series
indicates possible problem with network configuration.
The second series is separated with a pause of at least 0.6 seconds and consists
of two flashes. The first indicates that data was received and/or transmitted
LED Signals
0 0.5s 1s 1.5s
— 33 —
Содержание YDEN-02 Series
Страница 19: ...Figure 2 Gateway server settings 19...
Страница 28: ...Figure 3 Filter configuration page 28...
Страница 59: ......
Страница 60: ......