20
19
1
2
1
CAUTION
WARNING
Never use solvents such as alcohol, thinner, benzene, or nail
polish remover.
Do not leave or store the device with skin care product or
lotion residue remaining on the device.
Unplug the AC adapter from the wall socket when cleaning.
Cleaning with the adapter attached may cause electrical
shock hazard, short circuit, or fire.
Keep water from entering inside the unit as this may cause
electrical shock hazard, short circuit, or fire.
How to Store
Maintenance and Inspection
If you will not be using the device for an extended period, clean the main
unit and the attachment before storing.
When not in use, turn off the power, unplug the AC adapter from the wall
socket, and store in a clean, dry location.
Do not use or leave the device near stoves or heaters, under direct
sunlight, in humid places such as the bathroom, or in an unstable place.
Keep this device out of the reach of children.
If you have not used the device for an extended period, inspect it
carefully and check that the device works properly and safely before use.
If there is any evidence of a malfunction, refer to the “Troubleshooting”
section (p.21) before calling for service.
If the device malfunctions, appears damaged, or needs service, please
contact your local distributor.
How to Clean Attachment and Main Unit
Treatment window and cool plate must be cleaned every time after
each treatment.
Clean the main unit regularly to avoid malfunction or operation failure.
Always turn off the power and unplug the AC adapter from the main unit
and from the wall socket before cleaning.
Use a sponge or cloth with diluted mild detergent
for heavy dirt.
Never wipe the device with solvents such as
alcohol, thinner, benzene, or nail polish remover.
Use a wrung cloth to clean dirt from the surface.
Remove finger prints and keep the filter clean. Dirt or debris may
cause the filter to overheat, degrade performance of the flash, lead to
a malfunction, or cause skin irritation.
Remove any dirt or debris from the attachment filter as well.
Remove skin care or hair debris or dirt on the yellow glass
filter with a soft cloth or cotton tip.
Gently remove any skin care product or dirt that may be on the inner
edges of the treatment window opening by using a cotton tip.
Also clean any dirt in the areas of contact between the treatment
head and Face Attachment with a wrung cloth.
Use a wrung cloth to clean dirt, skin care product, or hair
debris from attachment, treatment window, and cool plate.
Cleaning Treatment Window and Face Attachment
Cleaning the Main Unit
After Treatment
After Treatment
After Treatment
