23
• Recommended speed for moving the device: approx. 2 cm per second
* If the treatment temperature feels too hot, move the head more
quickly.
• One short beep will sound to indicate the half-way point in the
operating time. When you hear the beep, begin care on the other side
of your face.
How to use the device on your skin
Move the electrode head over the skin in the direction of the arrows shown below.
The LED light can be used to treat areas around the eyes and the upper eyelids.
DAILY Mode
• Use in a position in which the entire surface of the electrode head comes in a
contact with your skin.
• Be sure to move the device over the skin as you use it (except when using the device
in EYE CARE Mode and COOL Mode). Using the device continuously on the
same area may lead to burn injuries.
• Do not use on the upper eyelids (except in COOL Mode) or around the eyes
(except in EYE CARE Mode and COOL Mode).
* The LED light can be used over the upper eyelids and around the eyes. Close your
eyes and hold the device at least 5 cm away from your skin. Do not look directly
into the LED light.
ATTENTION
Areas you should not treat
* Close your eyes and hold the
LED light at least 5 cm away
from the eyes.
Can only be treated
with LED light
Press and move the device
in a circular, massaging
motion, as indicated by the
arrows.
