PartPro300 xT
14
4. FIRST USE
4.2 Auto Calibration
4.1 Select Language
Ensure all installation parts (print nozzle, guide tube, and filament) have been well connected.
When first using the printer, user must complete first time setup. Otherwise, printer will continue to ask and not go onto next
stage.
①
After press OK for welcome screen, the touch panel will diplay the Auto-calibration, press START and press
“OK” when completed calibration.
Turn on the printer power, the touch panel will display the company logo. Then,select the language.
4.3 Network Setup
The user can use the Wi-Fi dongle for network settings. If you skip the network setting, you can directly go to the next stage
and the system won’t remind you again.
①
Press “START” to start the network setting.
②
Select your Netwok and press “YES” for connection.
③
Key in the password for connection and press “OK” once Wi-Fi connected.
Note:
The first print test must use the DUAL NOZZLE printing on ONE SIDE, using ABS.
DO NOT use other type filament for testing, it will cause setting error.
