PartPro300 xT
11
3.2 Print Nozzle and Filament Installation
Before installing the print nozzle to the nozzle holder, make sure the print nozzle has no cosmetic issues.
①
Remove the top cover, then press down the white button on top of the nozzle holder, and then mount the dual print nozzle
on the nozzle holder.
②
Insert the wire plug firmly & evenly. Do not tilt in any direction.
③
Insert one end of the tube into the print nozzle tube inlet.
Note:
• DO NOT turn on the power during installation.
• Installation single print nozzle procedure refers item
①
~
③
.
Note:
Make sure the guide tube is totally inserted into the inner tube hole on the filament storage box.
Note:
Use 600g & 1kg filament reel in filament box may have risk of tangle. Please proceed with caution.
④
Insert the other end of the guide tube into the filament storage box (Spool 1 & Spool 2). Before inserting the guide tube to
the filament storage box, pull the lock to open both sides of the box cover.
⑤
Put the filament spool into the spool holder.
⑥
Insert the filament to the guide tube, until filament contact the sensor nozzle. It will automatically feed to the printer
through the guide tube.