P7
Before setting the WiFi, please insert
the WiFi dongle into USB port on the
top of printer.
1. Tap ADD and the printer will
start to search for available
access points.
4. Confirm the connection is
completed
.
2. Tap the access point to be
used
.
3. Enter the password for the
access point.
WiFi setting
●
Use a USB cable to connect the printer to the computer and run the XYZmaker.
●
Check if the WiFi function is activated on the computer and connect to the access point.
1
. Run the XYZmaker. Click on File > Print > da Vinci
Printer.
2. Select the printer to be used.
PRINT:
Set printing parameters and quali
-
ty. If only a file conversion is needed, tap
“PREPARE”.
DASHBOARD:
Monitor print head
temperature, filament used and filament
loading / unloading.
3. When the software displays ”
READY
”, the
connection is established successfully
.
Now, you can click on “DASHBOARD” to
monitor the printer or “PRINT” to print a
file.
Use the XYZmaker to verify if the WiFi connection is established successfully
