4
Install the Guide Tube and Extruder Module
Printer Setup
WARNING
: Hazardous Moving
Parts. Keep Fingers and Other
Body Parts Away.
01
Insert guide tube into the
extruder module port.
Press the white button and
align the extruder module with
the bracket. Once aligned,
release the white button to
connect the extruder module
with the bracket.
04
Connect the flat cable to the
extruder module. (Be sure to
insert the flat cable in the right
direction.
10
Ensure that the guide tube has
been tightly inserted into the
feed module port.
07
Feed the guide tube through
the top cover.
08
09
Direct the bottom locking
catches toward their slots
then press the latch to rotate
clockwise.
Attach the top cover to the
machine.
The flat cable is bending for
printing smoothly purpose,
please do not adjust.
03
Follow the illustration to bend
the flat cable.
06
Use the cramp ring to hold the
filament guide tube and flat
cable. (Place the cramp ring on
the flat cable marker.)
NG
Follow this method
Note
To load the filament, refer
to the [Software Setup]
section.
05
02
