Apr. 2017
P 3
da Vinci
Jr.1.0A
Product Overview
．
Extruder
．
Leveling tool
．
Quick Guide and
Warranty
Card
A: Filament movement area
B: Feed module
C: Detector
D: Extruder
E: Filament
F: Print bed
G: SD card port
(Storage format: FAT32)
H: Control and display panel
I: Front cover
USB Port
Power Switch
Power Connector
• The maintenance tools provided should be only handled by an adult. Please keep the tools away from children.
• The scraper is used to remove the object from the print bed when printing has finished. The bed tape is
reusable and it can be replaced when it has worn out.
• Store the gear cleaning brush properly. This tool shall only be used to clean the specified parts of the machine
and should not be used for the cleaning of other parts to prevent damaging the machine.
• Do not place the printer in humid or dusty environment such as bathrooms and high traffic areas.
• Do not place the printer on a rickety surface and/or inclined position. Printer may fall down/or tumble and it
may cause serious injury.
• Please keep the front door closed during printing to avoid injury.
• Do not touch the interior of the printer while printing. As it may be hot and include moving parts.
．
Cleaning Brush
．
Scraper
．
USB Wire
．
Power Cord
．
Bundled filament
．
Bed Tape X 3pcs
．
Power Adapter
．
Guide tube
．
Cleaner Wire x 5
．
Feeding Path
Cleaning Pin
．
SD Card
Accessory Checklist
Important Safety Instruction for Use of Maintenance Tools
Important Safety Instruction
Product Overview
．
Tube Remover
