P 7
V.1.1
da Vinci 1.0 Pro 3in1
Printer screen menu, functions and messages
UTILITIES
CHANGE CART
HOME AXES
Installation and removal of filament, calibration of the printing bed and printing settings, including:
◆
CHANGE CART
◆
HOME AXES
◆
Z OFFSET
◆
JOG MODE
◆
CALIBRATE
◆
BUILD SAMPLE
◆
CLEAN NOZZLE
Load, unload filament and view the information about the filament. Using XYZprinting
filament to ensure smooth operation of the machine is recommended.
Refer to P.14 for Load filament
Use the function to move the extruder to upper right corner of printing space and the print bed to the top.
Extruder homing:
Select “YES” to return the extruder to the preset position.
UTILITIES
CHANGE CART
HOME AXES
Z OFFSET
CHANGE CARTRIDGE
LOAD FILAMENT
UNLOAD FILAMENT
Pro. 3in1
UTILITIES
SETTINGS
INFO
HOME AXES
ARE YOU SURE?
NO
YES
UTILITIES
CHANGE CART
HOME AXES
Z OFFSET
Z OFFSET
Use the function to adjust the print bed upwards and downwards, and the printing distance
between the bed and printing module. The function will also record the setting value.
PREPARING
PLEASE WAIT
UTILITIES
HOME AXES
> Z OFFSET
JOG MODE
[ ^ ]
Z OFFSET 0.00 mm
[ v ]
[OK] TO RETURN
Wait for the extruder to heat up to operating temperature and unload the filament.
As "PULLOUT FILAMENT" is displayed on the screen, press the release arm and
pull out the filament.
In unloading filament, activating the filament unloading function on the control panel of the printer.
UNLOAD FILAMENT
●
