2
they do not play with the appliance.
To prevent electrical shock, be sure to take the following precautions:
1. Make sure the unit is grounded. Always connect power to a grounded receptacle.
2. Do not pressure the AC power cord. Be sure the work area is well ventilated.
3. Do not bump, hit, pour water/liquids or otherwise subject the heating surface to
physical shock. This may damage the heater.
4. To isolate the equipment from the mains before commencing repairs or making any maintenance
to avoid electric shock. This may result in Death or serious injury.
5. Do not expose the unit to moisture nor use the unit with wet hands.
6. Turn the power switch off and remove the AC power cord by pulling the plug (not the cable) when
the unit will remain unused for a longer period of time.
7. Do not modify the unit.
Warning
Soldering / Desoldering Function Warning
◆
Always place the soldering & desoldering irons in its original holder when not being used.
◆
Keep the soldering and desoldering tip and heating element away from the body, clothes and
flammable material when in operation.
◆
The soldering and desoldering tip and the heating element are still remaining hot after being
switched off. Ensure that you do not touch the tips and the heating elements.
◆
For your health, do not inhale solder fumes.
◆
You must not undertake work on live parts. Only the technician is permitted to undertake repairs.
Use the original replacement part only.
Hot Air Function Warning
●
To last the life of the heating element, not recommend continuously using at low air flow
and high temperature.
Let the heating element be cooler after using a maximum 20 minutes.
Ensure that it is placed back on its cooling stand to cool down between rework operations. Also,
do not switch the hand tool on while it is in the cooling stand.
Fail to comply with the
instructions may result in damage to the hand tool.
●
Do not aim the hot air at your eyes.
Do not allow the hot air from the hand tool to aim the eyes
as serious eye damage may occur.
●
The hot air pencil can produce a lot of heat.
Do not allow the heater and the nozzle to contact
exposed skin as burning may occur. To eliminate the possibility of burns, allow time for the
equipment to cool before commencing maintenance.
●
Death or serious injury may result from electric shock.
It is therefore essential to isolate the
equipment from the mains before commencing repairs.
