Xylem WTW Multi 3320, Руководство по эксплуатации

Страница: 75 / 106

Multi 3320 Data memory
ba77053e04 07/2018
75
11 Data memory
You can transmit measured values (datasets) to the data memory:
 Manual data memory (see section 11.1 M
ANUAL STORAGE
, page 75)
 Automatic storage at intervals (see section 11.2 A
UTOMATIC DATA STORAGE
AT INTERVALS
, page 76)
11.1 Manual storage
You can transmit a measurement dataset to the data memory as follows.
With each data storage process, the current datasets of the sensors indicated
on the display are transmitted to the interface at the same time.
With each data storage process, the current datasets of the sen-
sors indicated on the display are transmitted to the interface at the
same time.
1. Press the <STO> key shortly.
The menu for manual data storage appears.
2. If necessary, change and confirm the ID number (1 ... 10000) with
<

><

> and <ENTER> .
The dataset is stored. The meter switches to the measured value dis-
play.
15.02.2014 11:24:16
pH 7.000 24.8 °C AR +++
O2 7.80 mg/l 24.8 °C AR +++
ID number: 1
Continue
Manual data storage 4 von 500
15.02.2014
14:15
Back