11 / 25
Password configuration:
(
CONF
) > „
General
“ > „
Password
“
>
enter and repeat password.
Via (
INFO
) or (
CAL
) you select the position to change.
Via (
CONF +1
) or (
LOG -1
) you change the position.
(
ON/OFF
) confirms and saves your setting.
(
MEAS
) terminates the entry dialog without transferring the value.
Configuration of the clock
4.3
Configuration of the clock:
„
General
“ > „
Clock
“, then make the corresponding setting.
Via (
CONF +1
) or (
LOG -1
) you selected the desired setting.
(
ON/OFF
) confirms and saves your setting.
(
MEAS
) terminates the entry dialog without transferring the value.
Configuration of the language
4.4
Configuration of the language:
„
General
“ > „
Language
“, then make the corresponding setting.
Via (
CONF +1
) or (
LOG -1
) you selected the desired setting.
(
ON/OFF
) confirms and saves your setting.
(
MEAS
) terminates the entry dialog without transferring the value.
Configuration of the switch-off time
4.5
You can set the time on the meter, after which the meter will be switched off automatically.
The data logger also records while the meter is off, if the data logger has been set up for this.
Configuration of the automatic switch-off time:
„
Genera
l“ > „
Switch-off time
“, then enter the desired switch-off time.
Via (
CONF +1
) or (
LOG -1
) you selected the desired setting.
(
ON/OFF
) confirms and saves your setting.
(
MEAS
) terminates the entry dialog without transferring the value.
If the
switch-off time = 0
was selected, the function is deactivated!
5
Data logger
The meter has an integrated ring memory data logger with real-time clock for 4,000 data sets
(date, time, main measured value, secondary measured value, measuring temperature).
The saved data can either be viewed directly on the display or read via the USB interface.
(
CONF
) will take you to the menu item „
Configuration
“ and on to the submenu item „
Data logger
“.
The entire structure of the menu is displayed graphically in
chapter 3.4.
